High Quality Monocrystalline Solar Module – best suited for charging 12V batteries – Only A grade cells are used, thus only cells that have scored above average in the performance tests
The most important technical specifications at a glance: Power (Pmax): 150W – Voltage (Vmp): 17.8V – Max. Current (Imp): 8.43A – open-circuit voltage (Voc): 21.3V – short-circuit current (Isc): 9.10A – max. system voltage: 1000VDC – ambient temp.: from -40°C to +85°C – Dimensions (L x W x H): 670 x 1340 x 35mm – Weight: 12.0kg – Bypass diodes: 2 pieces IOSQO50 – protection class connection socket: IP65 – Temperature coefficient: 0.45%/°C – Cable Connection: installed with 2 x 0.8m 4mm² pre-assembled MC4 plugs
Permanent monitoring of the module quality and performance data through tests under real and laboratory conditions – Every Offgridtec Solar Power Panel is subjected to a flash test before delivery – for technical queries, the Offgridtec GmbH customer system is always at your service
The module is supplied with 80 cm long cables per plus and minus side – on each end of the cable there are MC4 plugs for a secure cable connection to the charge controller – corresponding connection cables can be found under Amazon ASIN B07848ZF74 (6mm² cable cross section) or under Amazon ASIN B0085 O98WY (4mm² cable cross section) or Amazon ASIN B0784CZTQM (10mm² cable cross-section)
The cell efficiency of the Offgridtec-Mono series is 20.4% and is thus higher than most modules with similar technical specifications – this is particularly noticeable by a positive power tolerance and measurably higher yield under real conditions – as a standard, Offgridtec solar panels are equipped with bypass diodes (number of units varies depending on model), which reduces the power drop in the event of shading